How to Make a Custom Suppressor

[crosshairs93]

I read somewhere that a suppressor is technically not illegal if it cannot be used on a real firearm. So if you build it like i did it won't actually be illegal.

Materials:
1" PVC pipe
1/2"-3/4" alminium pipe
Sound absorbing foam
1" metal washer
Electrical tape

1. Cut PVC to prefered length
2. Cut aluminium 2-3" less than PVC
3. Drill lots of holes in the aluminium pipe
4. Glue washer to the end of the PVC
5. Cut foam 2" less than aluminium
6. Wrap foam around aluminium leaving 2" of bare pipe on one end
7. Insert the foam and aluminium into the PVC with the foam coverd end first

You suppressor is now finished. just wrap the end of your barrel with E-tape and slide it on.

[borninshadows]

Hey, where do you get this foam, I can't find any at my local stores?

[crosshairs93]

It's not a specific type of foam. its anything that absorbs sound, i.e cotton balls, cotton fabric, ect.

[borninshadows]

Great, I will be using compressed cotton, as that's what TM uses in there upgraded GSPEC silencers.

[sicxsquadarcher]

i made a nice one with insulator foam and paper towel rolls .sounds sweet.