|
|
Post by ben1123 on Feb 5, 2009 23:51:04 GMT -5
i heard about this on the airsoftsniperforum and just wanted to share this here this is a mod to improve accuary on any gun so what you need is liquid car polish i belive he used Nu finish a paper towel or some thing to spread to polish and a cleaning rod basically all you need to do is then clean the barrel but with the polish.it will improve your accuracy by alot heres a link and it explains more and an accuracy test airsoftsniper.proboards107.com/index.cgi?board=gear&action=display&thread=844 |
|
|
|
Post by crosshairs93 on Feb 6, 2009 8:39:17 GMT -5
:owow!! Thats pretty cool. so you just use it like silicone oil in the barrel. why didn't I think of that.
Great info!
-Cross
|
|
|
|
Post by mj23lj on Feb 9, 2009 21:16:42 GMT -5
Hold it...
No offense but that sounds very, well, wrong to me... Is the thread trying to say clean the barrel with silicone spray, because cleaning a barrel with silicone based spray is common knowledge to me. If it's saying coat the inside of the barrel with silicone spray, well that would definitely decrease accuracy.
Every barrel will will increase in accuracy with a good clean, and what else is there to use other than a silicone based spray?! (Please don't say alcohol). If you were to look on ASR, you would see a thread like this, but it is simply entitled something like "how to clean a barrel".
Bottom line, a cleaned barrel is no replacement for a Tight Bore Barrel...
I'm going to lock this thread (within the week it will be deleted) until PM'd otherwise
|
|
|
|
Post by crosshairs93 on Feb 10, 2009 20:17:58 GMT -5
hang on a sec,
he wasn't just talking about cleaning the barrel, he was saying use car polish just like silicon spray.
I don't see how that would decrease accuracy. I mean look at his groupings.
-Cross
|
|
|
|
Post by mj23lj on Feb 11, 2009 19:18:16 GMT -5
ben1123 - My extended apologies, I misread the thread completely, some how I even missed out the part about car polish (I was very tired at the time). Thread unlocked...
If anyone tries this then please review.
|
|
|
|
Post by ben1123 on Feb 12, 2009 23:36:40 GMT -5
thank you i was going to pm you but then i figured i would say something stupid and get kicked from this fourm
so back on topic
i am going to try this over my long weekend and should have a review by next friday
|
|
|
|
Post by ben1123 on Mar 7, 2009 1:07:38 GMT -5
heres my results with polising barrels
stock at 65ft
1.5in by 2in
polished at 65ft
1in by 1 3/4 in
the test was done with my stock utg mk96 with matrix .30g bbs
|
|
